Come and use the Betterpress by Spellbinder's with me!

Come and use the Betterpress by Spellbinders with me!

A few months ago I went to a 2 day event that was sponsored by Spellbinders and it was so much fun. We got a ton of spellbinders dies and toured the offices and warehouse. We did a couple make and takes at the office and one was with the Betterpress system.

I fell in love with the crispness of the press and how beautiful the cards turned out. Its rally hard to see unless its in person but the image is pressed into the cotton paper making it look like a professional print.

The better press works with a lot of different machines including the BigShot, Vagabond, Sizzix Switch, and Spellbinders Platinum. It really just needs to fit the Betterpress through without an issue. I would imagine if you can fit an old steel rule die, you can fit the Betterpress inside the machine.

I am involved in a monthly card swap and decided to use my Betterpress for them.

You first put your metal press plate on the grid. The grid is set up for an A2 or an A7 card. I personally use the smaller A2 cards.

Then you ink it up by smooshing and twisting the ink pads on top to get good coverage. A tip is it won't dry fast so you are good to be super slow about this part.

The clear plate that goes on top holds your card. You simply tape your card to this part in the same place as the grid.

Run it through the machine, don't press the clear part down though again, you don't want to mess up the image.

This is your end result. Isn't it so cute! I love love love it. You have to see it in person!

There were a few cards I made with the system and will paste them below for your viewing pleasure.

These were all card fronts made quickly with the Betterpress! It gives a professional look with a letter press feel. I really love this addition to my craft stash. Let me know if you have any questions.

❤️imginbugcrafter

Follow me!

Comments

Come and make your own sublimation spray with me!

Come make some sublimation spray with me! You are asking yourself what is sublimation spray and what is it used for? Well, as you may or may not know, you have to sublimate on polyester. The higher the % of polyester the higher chance your image will stay on the item you are subbing on. Well, I found a way to make some spray that you can spray on cotton or any other fabric and it will sublimate. For instance, I tried sublimating on this random patch I have. I don't know what it is made of so i wanted to see if it would work. It didn't. Random Patch with no sub spray: Then I made the sublimation spray. Items you need: Polycrylic protective finish, I used clear satin but you can use clear matte as well. Spray Bottle Water Then your usual sublimation products: Sub paper Sub printer Heat press Fabric to sublimate on To make the spray, use 8 ounces of water and 2 tablespoons of Polycrylic. Mix them together into a jar (I used a maso...

Simon Hurley Create Stamping Foam by Ranger (The best thing I've seen in a long time)

Stamping Foam! Craft With Me! You can heat this puppy up and press anything into it to make a stamp. This is the first time I have used this item and it was super simple to use. I got the hang of it really fast and I will be using it a ton. I was really impressed that I got such good impressions the very first time I used it. You could also use this with an acrylic block I just didn't see a need. Items needed: Simon Hurley Create. By Ranger Stamping Foam 3" x 4.25" block Water bottle-I used one from the Dollar Tree Heat gun-I used the Embossing Heat Tool by Marvy Cardstock-I actually used the back of a paper pad to practice Instructions: Heat your stamping foam up for around 15 seconds with your heat gun Stamp your foam onto your favorite texture Make sure to push your foam into the item pretty good Ink up your Foam! Rub ink in a circular motion onto the stamping foam Spray the stamping foam with water (3 sprays fine mist will do) Stamp yo...

Foil With Me!

Come Craft With Me! I'm not sure why, but I LOVE foil and foiling. I don't actually foil all that often but I love how it looks. My husband bought me the Minc Foil machine for Valentines Day and I'm excited to play with it. I will go through each Foil tool below: (This is going to be a long blog post) Fun Foils by Queen and Co. Nail Foil by Amazon Heatwave Pen by We R Memory Keepers Foil Quill for a cutting machine such as (Silhouette Cameo, Cricut) by We R Memory Keepers Foil Quill Freestyle which is a handheld foil writer by We R Memory Keepers Minc Foil Machine by Heidi Swapp Queen and Co. Fun Foils This foil sticks to sticky surfaces. If you are not familiar with Queen & Co. they make super cute shaker card stuff. The foil they came out with will stick to their shakers or really any sticky surface like tape or glue. you simply press the foil to the sticky surface and it is foiled. Super simple, super easy. Sometimes you do not get a good...

Craft With Me!

Search This Blog